GC - 7115/7131

 

This is a coolant rotating joints serie. Seals are in tungsten carbide; a pair  of spaced ball bearings  are protected by a slinger (labirinth). This slinger directs any eventual seal leakage away from the bearings and out the vent holes in the housing so itís possible the vertical mounting. The internal fluid passage, straight and without any resistance, minimizes the pressure drop. The sealing is ensured by three springs set outside the flowing fluid. Itís also available a type with radial inlet port.

 

Avoid working with maximum speed at maximum pressure

 

t max  70 įC 
p max  70 bar
n max  10000 RPM

 

 

Type BSP PDF
GC-14-7115 1/4
GC-38-7115 3/8

 

GC-7131

  

This is a coolant rotating joints serie. Seals are in tungsten carbide; a pair  of spaced ball bearings  are protected by a slinger (labirinth). This slinger directs any eventual seal leakage away from the bearings and out the vent holes in the housing so itís possible the vertical mounting. The internal fluid passage, straight and without any resistance, minimizes the pressure drop. The sealing is ensured by three springs set outside the flowing fluid.Itís also available a type with axial inlet port.

 

Avoid working with maximum speed at maximum pressure

 

t max  70 įC 
p max  70 bar
n max  10000 RPM

 

Type A BSP PDF
GC-14-7131 1/4
GC-38-7131 3/8